Thursday, 21 March 2019

AN EFFICIENT APPROACH FOR FOUR-LAYER CHANNEL ROUTING IN VLSI DESIGN

AN EFFICIENT APPROACH FOR FOUR-LAYER CHANNEL ROUTING IN VLSI DESIGN
Ajoy Kumar Khan1, Bhaskar Das2 and Tapas Kumar Bayen3
1Department of Information Technology, Assam University, Silchar, India
2Department of Information Technology, Assam University, Silchar, India
3Department of Computer Science and Engineering, N. I. S. T, Berhampur, India

ABSTRACT

Channel routing is a key problem in VLSI physical design. The main goal of the channel routing problem is to reduce the area of an IC chip. If we concentrate on reducing track number in channel routing problem then automatically the area of an IC chip will be reduced. Here, we propose a new algorithm to reduce the number of tracks using four layers (two horizontal layers and two vertical layers). To be more specific, through this algorithm we convert a two-layer channel routing problem into a four-layer channel routing problem using VCG of the channel. Next, we show the experimental results and graphical structure of that solution.

KEYWORDS

Track, Channel routing, Manhattan routing model, VCG & Merging. 






Wednesday, 20 March 2019

A XOR THRESHOLD LOGIC IMPLEMENTATION THROUGH RESONANT TUNNELING DIODE

A XOR THRESHOLD LOGIC IMPLEMENTATION THROUGH RESONANT TUNNELING DIODE
Nitesh Kumar Dixit1 and Vinod Kumari2
1, 2Department of Electronics and Communication Engineering, BIET, Sikar

ABSTRACT

Resonant tunneling diodes (RTDs) have functional versatility and high speed switching capability. The integration of resonant tunneling diodes and MOS transistor makes threshold gates and logics. The design and fabrication of linear threshold gates will be presented based on a monostable bistable transition logic element. Each of its input terminals consist out of a resonant tunnelling diode merged with a transistor device. The circuit models of RTD and MOSFET are simulated in HSPICE. Two input XOR gate is designed and tested.

Keywords

MOSFET, RTD, SPICE, Threshold, TLG






Saturday, 16 March 2019

DESIGN & ANALYSIS OF A CHARGE RE-CYCLE BASED NOVEL LPHS ADIABATIC LOGIC CIRCUITS FOR LOW POWER APPLICATIONS

DESIGN & ANALYSIS OF A CHARGE RE-CYCLE BASED NOVEL LPHS ADIABATIC LOGIC CIRCUITS FOR LOW POWER APPLICATIONS
Sanjeev Rai1, Govind Krishna Pal2, Ram Awadh Mishra3 and Sudarshan Tiwari4
1Department of Electronics & Communication Engineering, Motilal Nehru National Institute of Technology, Allahabad, India
2Apache Design Solutions, Noida, India
3Department of Electronics & Communication Engineering, Motilal Nehru National Institute of Technology, Allahabad, India
4Director National Institute of Technology, Raipur, Chhatisgarh, India

ABSTRACT

This paper focuses on principles of adiabatic logic, its classification and comparison of various adiabatic logic designs. An attempt has been made in this paper to modify 2PASCL (Two Phase Adiabatic Static CMOS Logic) adiabatic logic circuit to minimize delay of the different 2PASCL circuit designs. This modifications in the circuits leads to improvement of Power Delay Product (PDP) which is one of the figure of merit to optimize the circuit with factors like power dissipation and delay of the circuit. This paper investigates the design approaches of low power adiabatic gates in terms of energy dissipation and uses of Simple PN diode instead of MOS diode which reduces the effect of Capacitances at high transition and power clock frequency. A computer simulation using SPECTRE from Cadence is carried out on different adiabatic circuits, such as Inverter, NAND, NOR, XOR and 2:1 MUX.

KEYWORDS

Adiabatic logic, Low-power, Two phase clocked, Energy recovery, Split-level, Diode based logic, Power Delay Product (PDP), LPHS (Low Power High Speed). 



Friday, 15 March 2019

HIGH FIN WIDTH MOSFET USING GAA STRUCTURE

HIGH FIN WIDTH MOSFET USING GAA STRUCTURE
S.L.Tripathi1, Ramanuj Mishra2, R.A.Mishra3
Department of Electronics and Communication Engineering, MNNIT, Allahabad

ABSTRACT

This paper describes the design and optimization of gate-all-around (GAA) MOSFETs structures. The optimum value of Fin width and Fin height are investigated for superior subthreshold behavior. Also the performance of Fin shaped GAA with gate oxide HfO2 are simulated and compared with conventional gate oxide SiO2 for the same structure. As a result, it was observed that the GAA with high K dielectric gate oxide has more possibility to optimize the Fin width with improved performance. All the simulations are performed on 3-D TCAD device simulator.

KEYWORDS

Gate all around(GAA),TG FinFET, High K gate oxide, Silicon-On-Insulator(SOI), Work function, Short channel effect, DIBL, Subthreshold Slope,3-D Sentaurus TCAD tool. 





Thursday, 7 March 2019

DESIGN AND IMPLEMENTATION OF ANALOG MULTIPLIER WITH IMPROVED LINEARITY 
Nandini A.S1, Sowmya Madhavan2 and Dr Chirag Sharma3
1Department of Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Yelahanka, Bangalore- 560064
2Department of Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Yelahanka, Bangalore- 560064
3Department of Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Yelahanka, Bangalore- 560064

ABSTRACT

Analog multipliers are used for frequency conversion and are critical components in modern radio frequency (RF) systems. RF systems must process analog signals with a wide dynamic range at high frequencies. A mixer converts RF power at one frequency into power at another frequency to make signal processing easier and also inexpensive. A fundamental reason for frequency conversion is to allow amplification of the received signal at a frequency other than the RF, or the audio, frequency. This paper deals with two such multipliers using MOSFETs which can be used in communication systems. They were designed and implemented using 0.5 micron CMOS process. The two multipliers were characterized for power consumption, linearity, noise and harmonic distortion. The initial circuit simulated is a basic Gilbert cell whose gain is fairly high but shows more power consumption and high total harmonic distortion. Our paper aims in reducing both power consumption and total harmonic distortion. The second multiplier is a new architecture that consumes 43.07 percent less power and shows 22.69 percent less total harmonic distortion when compared to the basic Gilbert cell. The common centroid layouts of both the circuits have also been developed.

KEYWORDS

Multiplier, Gilbert cell, Noise spectral density, Total Harmonic Distortion, Transconductance 





Friday, 1 March 2019

A METHODOLOGY FOR IMPROVEMENT OF ROBA MULTIPLIER FOR ELECTRONIC APPLICATIONS
1Angila Rose Daniel and 2B. Deepa
1M.Tech in VLSI and embedded systems, Kerala technical university, India
2Assistant professor, EC Department, Kerala technical university, India

ABSTRACT

In this paper, propose an approximate multiplier that is high speed yet energy efficient. The approach is to around the operands to the closest exponent of 2. This way the machine intensive a part of the multiplication is omitted up speed and energy consumption. The potency of the planned multiplier factor is evaluated by comparing its performance with those of some approximate and correct multipliers using different design parameters. In this proposed approach combined the conventional RoBA multiplier with Kogge-stone parallel prefix adder. The results revealed that, in most (all) cases, the newly designed RoBA multiplier architectures outperformed the corresponding approximate (exact) multipliers. Thus improved the parameters of RoBA multiplier which can be used in the voice or image smoothing applications in the DSP.

KEYWORDS

Accuracy, approximate computing, efficient, error analysis, high speed multiplier, RoBa architecture, kogge stone adder, DSP processing




IMPACT OF DEVICE PARAMETERS OF TRIPLE GATE SOI-FINFET ON THE PERFORMANCE OF CMOS INVERTER AT 22NM
Prathima. A1, Kiran Bailey 2 , K.S.Gurumurthy 3
1, 2 Department of Electronics and Communication Engineering, BMSCE, Bangalore
3Department of ECE, UVCE, Bangalore University, Bangalore

ABSTRACT

A simulation based design evaluation is reported for SOI FinFETs at 22nm gate length. The impact of device parameters on the static power dissipation and delay of a CMOS inverter is presented. Fin dimensions such as Fin width and height are varied. For a given gate oxide thickness increasing the fin height and fin width degrades the SCEs, while improves the performance. It was found that reducing the fin thickness was beneficial in reducing the off state leakage current (IOFF), while reducing the fin height was beneficial in reducing the gate leakage current (IGATE). It was found that Static power dissipation of the inverter increases with fin height due to the increase in leakage current, whereas delay decreased with increase fin width due to higher on current. The performance of the inverter decreased with the downscaling of the gate oxide thickness due to higher gate leakage current and gate capacitance.

KEYWORDS

DIBL, Process and Device simulation, SCEs, SOI FinFETs, Sub threshold Slope, TCAD