Abdul Rauf Khan1, S. S. K. Iyer2,1Graphic Era University, India and 2IIT-Kanpur, India
ABSTRACT
The channel lengths of the top contact organic thin film transistors are usually defined during their fabrication by optical lithography or by shadow masking during the metal deposition process. Realizing short channel (sub-ten micron channel length) transistors by lithography will require costly lithography equipment. On the other hand, it is extremely challenging to achieve short channel transistors using the low cost shadow mask process. One low cost method of achieving short channel devices is to build vertical transistors with the transistor, where the channel gets defined in the vertical part of the device. This paper shows that vertical channel top contact organic thin film transistor has been successfully realized on the vertical edge of trench. This helped in creating the device with channel lengths less than ten microns, much smaller than what could be typically achieved with the use of shadow masks.
KEYWORDS
Organic Thin Film Transistors OTFT, Radio Frequency Identification RFID, Poly-thiophene PT, Thin film transistor TFT.
Original Source URL: https://aircconline.com/vlsics/V2N3/2311vlsics07.pdf
https://airccse.org/journal/vlsi/vol2.html
====================================
Submission Deadline : May 21, 2022
Contact Us
Here's where you can reach us: vlsicsjournal@airccse.org or vlsics@aircconline.com or vlsicsjournal@yahoo.com
No comments:
Post a Comment